Ergotron WorkFit-S Single LD Workstation with Worksurface and Keyboard Tray

Description

Ergotron WorkFit-S Single LD Workstation with Worksurface and Keyboard Tray

This easy-to-use sit-stand desk converter allows you to instantly raise or lower your keyboard and display in one simple motion, keeping your system stable as you work. Includes a complementary worksurface and larger keyboard tray.

WorkFit-S transforms an office into an ergonomic workstation. It’s easy to adjust through the full range of motion, moving straight up and down so it won’t intrude into your space upon standing. The keyboard sits below the desktop height for better ergonomic comfort when sitting.

Features:
Includes height-adjustment column, desk clamp, LCD pivot, worksurface, large keyboard tray
NOTE: Extra-long cables may be required to span between standing and sitting heights
Can be configured to hold a laptop instead of an LCD display: also order the LX Notebook Tray (50-193-200)
Weight Capacity: Maximum total load on height-adjustment assembly = 18 lbs (8.2 kg). LCD weight = 6 -16 lbs (2.3 -7.3 kg), worksurface ? 5 lbs (2.3 kg), keyboard tray ? 5 lbs (2.3 kg). For proper operation the total weight of components when added together should not exceed 18 lbs (8.2 kg)
Lift Range: LCD and keyboard adjust 18″ (46 cm) in tandem; LCD adjusts 4.8″ (12.2 cm) independently; maximum LCD height adjustment = 22.8″ (58 cm). The worksurface restricts the vertical travel range of the LCD lift pivot; height adjustment of LCD without worksurface is 5″ (13 cm)
Desk Clamp attaches to surface edge .47″ to 2.4″ (1.2 to 6 cm) thick
NOTE: Because mounting surface materials can vary widely, it is imperative that you make sure mounting surface is strong enough to handle mounted product and equipment
Ergonomic back-tilt keyboard tray ensures wrists remain in a neutral position during data entry – avoid repetitive-stress injuries while increasing comfort and productivity
Keyboard tray can be installed in nine potential locations relative to the monitor: centered or off-set to left or right; at standard focal distance or 2.2″ (5.6 cm) or 4.4″ (11.2 cm) farther away
Worksurface Dimensions: 0.25″H x 23″W x 15″D (6 x 585 x 380 mm)
Keyboard Tray Dimensions: 0.25″H x 27″W x 9″D (6 x 685 x 226 mm)
Durable, easy-to-clean exterior composed of aluminum, high-grade plastic and powder coated painted steel
Mounting Standards: VESA FDMI MIS-D, 100/75, C (hole pattern: 100 x 100 mm & 75 x 75 mm)
This product is certified in compliance with indoor air quality standards defined by ANSI/BIFMA pertaining to emissions of VOC (volatile organic compounds)